DIY Waterproofing
Geotextile Bandage - 50 Meters
Geotextile Bandage - 50 Meters
Couldn't load pickup availability
Features
- Bridges gaps
- Strengthens membranes by increasing tensile strength and puncture resistance
- Flexible Easy to wet out
- Outstanding conformability
- High grab tensile strength
Areas of Use
- Gutters
- Roof Areas
- Flashings
- Cracks in substrates
Use
Detailing in conjunction with Liquid Rubber; joins, corners, junctions, cracks, penetrations etc.
Method
- Apply a thin coat of Liquid Rubber, and lay down the bandage ensuring it’s nice and even with no wrinkles etc.
- Apply another coat of Liquid Rubber over the top of the Bandage whilst doing your first overall coat of Liquid Rubber membrane
50 lineal meters x 100 mm wide
Â
Â
Every junction in my waterproofing system is reinforced with this bandage. It bridges the junction, increases tensile strength and prevents reflection cracking all in one product. Essential waterproofing accessory.
Applied this over every junction where the flat roof membrane meets the parapet wall. These are the highest risk areas on any flat roof. Since using this system not a single leak at any parapet junction.
After embedding this bandage the finished membrane is noticeably more resistant to foot traffic damage and accidental puncture. Very important on a roof that gets regular access. Excellent product.
The bandage performs brilliantly once embedded. Found on a very hot day that leaving the roll in direct sun made it slightly stiffer and less conformable. Keep it in the shade before use in hot weather. Great product that does its job perfectly.
Works brilliantly at all the detail areas of my flat roof. Found that pre-cutting the bandage into the shapes needed for each detail before starting the coating process saved a lot of time. The product itself is excellent and the reinforcement is very effective.